ทัยแอร์ เครื่องชั่ง รับปรึกษา ออกแบบ เครื่องชั่ง เครื่องชั่งมือสอง เครื่องชั่งรถบรรทุกมือสอง ผลิตและจำหน่าย เครื่องชั่งสำหรับอุตสาหกรรมทุกชนิด จากทีมงานมืออาชีพ

W100 : Weight Indicator - 5/4 outputs (setpoint) 3/2 inputs

 
Options on request :
  • 16 bit optoisolated ANALOG OUTPUT: 0-20mA; 4-20mA (max 300 ohm); 0-10V; 0-5V; ±10V; ±5V (min. 10 kohm)
  • Initial verifi cation (Legal Metrology) M
  • Alibi memory.
  • 12 formulas/setpoint selection from external contacts
  • 12 formulas/setpoint selection from external selector switch
  • IP65 panel sealing gasket
  • Weight reading from 0-10Vdc (15kΩ) input .
  • Weight reading from 4-20mA (120Ω) input
  • Weight reading via serial input of 1 instrument
  • Two-way radio transmission
  • RS485 additional port.
  • 2A relay module
  • Input for connecting a second load cell
  • (1) if analog output is present: input on terminal 14 and output on
    terminal 15 are not available (see wiring diagrams); E / EC options
    not available
  • *) you can only choose one option from those marked with asterisk.
 
 
 
Weight Indicator in DIN box (48 x 96 x 130 mm, drilling template 44 x 91mm) for panel mounting. IP54 front panel protection. Six-digit red LED emialphanumeric display (14 mm h), 7 segment; 8 alarm LED. Four-key membrane keyboard. Real-time clock with buffer battery.
Two serial ports (RS232 and RS485) for connection to :
- PC/PLC up to 32 instruments (max 99 with line repeaters) by ASCII Laumas protocol (compatible with W60000) or ModBus RTU. Optional Protocols: Profi bus DP and Ethernet/ModbusTCP by appropriate converter.
- Remote display.
THEORETICAL CALIBRATION is performed via the keyboard.
REAL CALIBRATION with linearization up to 5 points.
REMOTE DISPLAY: the instrument can be used as a remote display with setpoints.
 
 
 
Technical Features :
 
     POWER SUPPLY and CONSUMPTION    12 - 24VDC +/-10% ; 5W
     NUMBER OF LOAD CELLS IN PARALLEL and SUPPLY    max 8 ( 350 ohm ) ; 5VDC / 120 mA
     LINEARITY/ LINEARITY OF THE ANALOG OUTPUT    < 0.01% Full Scale ; < 0.01% F.S.
     THERMAL DRIFT / THERMAL DRIFT OF THE ANALOG OUT.    < 0.0005 % F.S./°C < 0.003 % F.S./°C
     A/D CONVERTER    24 bit (16000000 points) 4.8kHz
     MAX DIVISIONS (with measure range: +/- 10mV =2mV/V)    ± 999999
     MEASURE RANGE    ± 39 mV
     MAX LOAD CELL’S SENSITIVITY    ± 7 mV/V
     MAX CONVERSIONS PER SECOND    300 conversions/sec.
     DISPLAY RANGE    - 999999 ; + 999999
     DECIMALS / DISPLAY INCREMENTS    0 - 4 / x 1 x 2 x 5 x 10 x 20 x 50 x 100
     DIGITAL FILTER / CONVERSION RATE    0.012 - 7 sec / 5 - 300 Hz
     LOGIC OUTPUTS (relays)    N. 5 - max 115 VAC ; 150 mA
   (N. 4 - Analog output versions)
     LOGIC INPUTS    N. 3 - optoisolated 5 - 24 VDC PNP
   (N. 2 - Analog output versions)
     SERIAL PORTS    RS232, RS485
     BAUD RATE    2400, 4800, 9600, 19200, 38400, 115200
     HUMIDITY (condensate free)    85%
     STORAGE TEMPERATURE    -30°C + 80°C
     WORKING TEMPERATURE    -20°C + 60°C
     WORKING TEMPERATURE (CE-M APPROVED)    -10°C + 40°C
 
Main functions
 
- 5 setpoints (4 setpoints if Analog Output is present) confi gurable as normally open or normally closed. The operator can decide the setpoints activation for the net weight value, gross weight value, otherwise for positive weights or for positive and negative weights.
- Setting of hysteresis value for each setpoint.
- 12 groups selection by 5 setpoint from selector switch or contacts (EC/E options).
- Peak holder displaying by closing the Peak contact.
- Net/Gross function by keyboard or external contact.
- Manual adjustment of zero value in case of zero-setting not possible.
- Auto zero function.
- Auto zero-tracking function.
- Print of the weight via keyboard or external contact with date and time.
Operation: The inputs can work as: net/gross weight, zero-setting, peak, print or can be remotely read via protocol.
The outputs can works as setpoints or can be remotely switched via protocol.
Weight transmitter approved OIML R61 (Automatic Gravimetric Filling Instruments) according to WELMEC Guide 8.8:2011 (MID).
CE- M approvable EN45501-2009/23/EC-OIML R76:2006
- Maximum number of verifi cation scale intervals n=10000
- Minimum input-voltage per VSI 0.2 μV
- Weighing range single range or multi range (max 3) or multi interval (max 3)
- Calibration via keyboard is protected through seals for the access to a setting jumper or installer password
- Semi-automatic zero and tare, predetermined tare funcions.
- Weight subdivisions displaying (1/10 e)
- The following values can be printed from external contact: net/gross weight; tare; predetermined tare; date; time; ID code (Alibi memory)